• Wipes sold separately.
• Satin Stainless Steel unit compliments any environment with easy dispensing of wipes.
• Flat top with 2" diameter opening lifts off lid to easily refill or replace wipes.
• Integrates a 5" diameter trash opening on side of unit for sanitary wipes and disposable waste.
• Unit lifts off open bottom to expose 3 gallon plastic trash receptacle for quick and easy serviceability.
• Decorative double beaded base adds elegance and stability with a fill rubber gasket to protect floor surfaces.
• Compatible with most center-pull bagged wipe rolls 9.5" in diameter or less.
• Disinfectant wipes, Anti-Bacterial, or Sanitizing Wipes can be used with 20 gauge stainless steel funnel top.
• Custom colors and logos available.
• Contains over 60% recycled content and 100% post-consumer recyclable.
• Made in the USA
• Unit Dimensions: 10" dia x 28" H
• Shipping Weight: 11 lbs

Free-standing Wipe Dispensers are offered in a wide variety to fit the needs of any facility. All of the various models are manufactured in the USA and are constructed of high grade aluminum and/or steel. Floor Standing models are available with or without heavily weighted bases for extra stability. Some models feature a built in trash receptacle for discarding used wipes, others eliminate the side opening thus allowing for additional Wipe Roll storage of up to 2 Auxiliary Rolls.

Antibacterial Wipe Dispensers and Waste Receptacles feature a heavy weighted base for added stability. A unique double push-button mechanism keeps the cover secured to the body while wipes are pulled one at a time. it's easy to depress the two push buttons on either side of the top cover and to lift off the top when it's time to refill with additional wipes. When done, the cover snaps back into place. To empty the waste compartment, lift the body off the base section to access the inner bucket. After emptying the trash bucket inside, slide the body back on the weighted base unit. No inner poly bag is needed.

• Helps reduce risk of infection and disease with FDA approved wet wipes
• Helps eliminate cross-contamination
• Can be used where soap and water may not be available
• Choose from Floor Standing Models, Wall Mounted Models, or Wipe Stations
• Made in the USA
• Available in 30 different finishes to match any design theme
• Double push button secures cover on body when pulling wipes
• Easy to load wipes and thread through specially designed star shape opening
• Indoor/Outdoor use
• Features heavy gauge rust-proof, corrosion/fire resistant aluminum and galvanized steel
• Constructed of 30% recycled material
• 100% post-consumer recyclable metal
• Storage space for 1 roll of wipes
• Compatible with most center-pull bagged wipe rolls 8.5" in diameter or less

Free-standing Wipe Dispensers are offered in a wide variety to fit the needs of any facility. All of the various models are manufactured in the USA and are constructed of high grade aluminum and/or steel. Floor Standing models are available with or without heavily weighted bases for extra stability. Some models feature a built in trash receptacle for discarding used wipes, others eliminate the side opening thus allowing for additional Wipe Roll storage of up to 2 Auxiliary Rolls.

Antibacterial Wipe Dispensers and Waste Receptacles feature a heavy weighted base for added stability. A unique double push-button mechanism keeps the cover secured to the body while wipes are pulled one at a time. it's easy to depress the two push buttons on either side of the top cover and to lift off the top when it's time to refill with additional wipes. When done, the cover snaps back into place. To empty the waste compartment, lift the body off the base section to access the inner bucket. After emptying the trash bucket inside, slide the body back on the weighted base unit. No inner poly bag is needed.

• Helps reduce risk of infection and disease with FDA approved wet wipes
• Helps eliminate cross-contamination
• Can be used where soap and water may not be available
• Choose from Floor Standing Models, Wall Mounted Models, or Wipe Stations
• Made in the USA
• Available in 30 different finishes to match any design theme
• Double push button secures cover on body when pulling wipes
• Easy to load wipes and thread through specially designed star shape opening
• Indoor/Outdoor use
• Features heavy gauge rust-proof, corrosion/fire resistant aluminum and galvanized steel
• Constructed of 30% recycled material
• 100% post-consumer recyclable metal
• Storage space for 1 roll of wipes
• Compatible with most center-pull bagged wipe rolls 8.5" in diameter or less

The free-standing wipe dispenser is ideal for any facility. A combination of aluminum and steel is used in the manufacture of these dispensers, which are made in the USA. As wipes are pulled one at a time, the cover is secured to the body by a unique double push-button mechanism. When it's time to refill with additional wipes, just depress the two push buttons on each side of the top cover and lift it off. Snapping the cover back into place is all that is required. You can access the inner bucket by lifting the body off the base section. Put the weighted base unit back on the body once the trash bucket inside has been emptied. It is not necessary to use an inner poly bag.

Features:

• FDA-approved wet wipes help prevent infection and disease
• Ensure cross-contamination is prevented
• When soap and water are not available, this product can be used
• Designed and manufactured in the United States
• A satin aluminum finish adds elegance
• Wipes are pulled with the help of a double push button that secures the cover to the body
• Wipes are easily loaded and threaded through specially designed openings
• It is made from heavy gauge aluminum and galvanized steel that is rust-proof, corrosion-resistant, and fire-resistant.
• 30% recycled materials were used in its construction
• Recyclable metal made from 100% post-consumer waste
• Two rolls of wipes can be stored here
• Most center-pull bagged wipes that have a diameter of 8.5" or less will fit
• Wipes with antibacterial properties from Glaro

Featuring an FDA-approved formula to kill 99.9% of common germs, these ammonia and bleach-free wipes are safe to use on your hands. No additional spray cleaners are required and no messy overspray occurs due to the pre-saturated wipes. A hermetically sealed wipe ensures that it remains moist until it is needed for optimal cleaning performance.

CDC Disclaimer:

Covid-19 is best addressed by hand rub products containing more than 60% ethanol or 70% isopropanol. In response to the international outbreak of COVID-19, the CDC notes that while the exact role of hand hygiene in reducing direct and indirect transmission of Coronaviruses between people is not known at this time, hand hygiene for infection prevention is an important part of the U.S. response.

Free-standing Wipe Dispensers are offered in a wide variety to fit the needs of any facility. All of the various models are manufactured in the USA and are constructed of high grade aluminum and/or steel. Floor Standing models are available with or without heavily weighted bases for extra stability. Some models feature a built in trash receptacle for discarding used wipes, others eliminate the side opening thus allowing for additional Wipe Roll storage of up to 2 Auxiliary Rolls.

Antibacterial Wipe Dispensers and Waste Receptacles feature a heavy weighted base for added stability. A unique double push-button mechanism keeps the cover secured to the body while wipes are pulled one at a time. it's easy to depress the two push buttons on either side of the top cover and to lift off the top when it's time to refill with additional wipes. When done, the cover snaps back into place. To empty the waste compartment, lift the body off the base section to access the inner bucket. After emptying the trash bucket inside, slide the body back on the weighted base unit. No inner poly bag is needed.

• Helps reduce risk of infection and disease with FDA approved wet wipes
• Helps eliminate cross-contamination
• Can be used where soap and water may not be available
• Choose from Floor Standing Models, Wall Mounted Models, or Wipe Stations
• Made in the USA
• Available in 30 different finishes to match any design theme
• Double push button secures cover on body when pulling wipes
• Easy to load wipes and thread through specially designed star shape opening
• Indoor/Outdoor use
• Features heavy gauge rust-proof, corrosion/fire resistant aluminum and galvanized steel
• Constructed of 30% recycled material
• 100% post-consumer recyclable metal
• Storage space for 2 rolls of wipes
• Compatible with most center-pull bagged wipe rolls 8.5" in diameter or less

Compatible with most center-pull bucketed wipe rolls - Buckets are held with interior straps that can accomodate buckets up to 12.5” D x 10” H (wipes not included).

• Easy to clean, stainless-steel lid
• Wipes are pulled through a 1.093” diameter grommet with teeth to help wipes stand up and tear easily
• Premium powder coat finish on body in Hammered Grey Gloss finish
• Easy-to-read, white graphics are pre-applied on two sides
• Interior removable support shelf holds a bucket of wipes for dispensing
• Removable shelf depth is 10.119”
• Additional buckets of wipes can be stored underneath.
• Storage area below shelf is 19.353” high
• Sturdy feet to protect floor surfaces and keep unit slightly elevated to allow for air circulation and prevent mold/mildew growth and “mop around” rings
• Bodies contain over 30% recycled materials, lids contain over 60% recycled materials, and entire receptacles are 100% post-consumer recyclable
• Made in the USA
• Custom logos available

An adjustable wipe dispenser and trash bin are included in this powder-coated steel modular station that can be placed together or separately according to your needs. To maintain a healthy, germ-free environment, use this hygienic, touch-free unit.

These buckets can accommodate bucket sizes up to 12.5" D x 10" H (wipes are not included). They are compatible with most center-pull bucketed wipe rolls.

• A 24-gallon Square trash container and a Square sanitizing wipe dispenser are included
• A Hammered Gray-colored wipe dispenser with decals that read 'Wipes' include a grommeted opening as well as an interior shelf that can be removed.
• This white gloss trash bin features "Trash" decals and a round opening. It has a 24-gallon plastic liner bin inside.
• Lids made from stainless steel that are easy to clean
• To help wipes stand up and tear easily, a grommet with teeth with a diameter of 1.093" is used.
• Powder-coated bodies with a premium finish
• Decal is pre-applied on both sides for easy reading
• There is a bucket of wipes stored on an interior removable support shelf
• There is a 10.119" depth to the removable shelf
• Under the shelf, additional buckets of wipes can be stored.
• A 19.353" deep storage area is below the shelf
• A plastic liner is included with 24-gallon container
• It has sturdy feet to protect floor surfaces and keeps the unit slightly elevated to ensure air circulation and prevent mold/mildew growth.
• More than 30% of the bodies contain recycled materials, over 60% of the lids contain recycled materials, and 100% of the receptacles are post-consumer recyclable
• The product is made in the USA
• Available for custom logos

Compatible with most center-pull bucketed wipe rolls - Buckets are held with interior straps that can accomodate buckets up to 12.5” D x 10” H (wipes not included).

• Includes Square sanitizing wipe dispenser and Square 24 gallon trash container
• Wipe dispenser in Hammered Gray finish with 'Wipes" decals includes grommeted opening and interior removable support shelf
• Trash bin in White Gloss finish and "Trash" decals includes square opening and 24-gallon plastic liner bin
• Easy to clean, stainless-steel lids
• Wipes are pulled through a 1.093” diameter grommet with teeth to help wipes stand up and tear easily
• Premium powder coat finish on bodies
• Easy-to-read decals are pre-applied on two sides
• Interior removable support shelf holds a bucket of wipes for dispensing
• Removable shelf depth is 10.119”
• Additional buckets of wipes can be stored underneath.
• Storage area below shelf is 19.353” high
• Includes 24 gallon plastic liner
• Sturdy feet to protect floor surfaces and keep unit slightly elevated to allow for air circulation and prevent mold/mildew growth and “mop around” rings
• Bodies contain over 30% recycled materials, lids contain over 60% recycled materials, and entire receptacles are 100% post-consumer recyclable
• Made in the USA
• Custom logos available

This slim all metal body unit is ergonomically designed to provide top sanitizing wipes dispensing and safe collection. It takes all sizes of hardshell wipes providing the adaptability you need. The modular design makes it easy to incorporate into any existing waste management system, or as a space-saving stand-alone unit. The metal body easily accommodates additional gel or wipes dispensing accessories on the side with a magnet kit. If you already have a Spectrum Series unit in your facility, you can elect to purchase only the dispensing and collection lid, and simply swap the lids out.

• Easy to use top dispensing and waste collection
• Baffle ensures only one wipe is dispensed at a time.
• Slim footprint makes it easy to place and move as required.
• Unique built-in hardshell wipes holder is integrated with the lid, and uses a bungee cord to secure any size of hardshell sanitizing wipes dispensers.
• Metal body can take signage as well as additional dispensing accessories using a magnet mount kit.
• Slim, sleek rectangular design fits easily into any professional environment and can easily be added on to an existing waste management system.
• Using the existing Spectrum Cube Slim body, a wide array of color choices are available. The waste and wipes lid is standard sandtex finish.
• Waste opening measures 5" x 7"